manualshive.com logo in svg

Nikon DS-L4, Instructions Manual

The Nikon DS-L4 Instructions Manual is available for free download at manualshive.com. This comprehensive manual provides step-by-step guidance on operating and maximizing the features of the Nikon DS-L4 product. Easily access the manual and enhance your user experience with this essential tool at no cost.

Share
Download
background image

Chapter 15

    Connecting to a Network (LAN) 

165

 

O

ther
 

Informat

ion

 

15 

Connecting to a Network (LAN) 

 
If you connect the DS-L4 to a network (LAN: Local Area Network), the following operations are available via the network. 

Saving images to, and viewing images on, a network drive 

  Saving images to a network drive during photographing 

  Displaying (on the DS-L4) captured images that have been saved on a network drive 

 

  Connect a network drive using wired LAN 

To save images to a network drive, be sure to connect the network drive and the DS-L4 via wired LAN. 

 

 

Obtaining images from a viewer terminal (including a PC) 

You can view the live image of the DS-L4 via a wired or 
wireless LAN from a viewer terminal (iMac, Windows PC, 
Windows tablet, or Android tablet) on which the viewer 
application DS-L4 Viewer is installed. The following 
operations can be performed from a viewer terminal: 

  Obtaining a live image 

  Downloading images from the DS-L4 to the viewer 

terminal 

 

 

 
The DS-L4 can be connected to a network in one of the following four ways: 

  Connecting to a LAN via a network hub (refer to "15.2") 

  Connecting to a network drive or viewer terminal (including a PC) directly without using a LAN connection (refer to 

"15.3") 

  Connecting to a LAN via a wireless access point (refer to "15.4") 

  Connecting to a viewer terminal with a wireless connection without using an access point (refer to "15.5") 

 

 Network settings 

You need to configure network-related settings correctly in order to connect the DS-L4 to the network. Before doing so, 
you must consult the network administrator of your organization for correct setup information. 

 

 

 

  LAN communication speed 

  The more viewer terminals simultaneously access the DS-L4, the slower the communication becomes. 

Normally, simultaneous access from three or fewer terminals does not adversely affect performance. 

  If the viewer terminals to be connected to the DS-L4 have a wired LAN connector, wired LAN connection is 

recommended. Communication using wired LAN connection is faster than using wireless LAN connection. 

 

For the models and OSs of supported viewer terminals, refer to "15.1 (3) OSs and models of viewer terminals". 

For details on how to set up and use a viewer terminal, refer to the applicable manual of DS-L4 Viewer. 

 

Instruction manual of DS-L4 Viewer can be downloaded from the following URL: 
http://www.nikon-instruments.jp/eng/software-update/camerasfor/pdf/M669_E_DS-L4_Viewer.pdf 

 

Connecting to a Network (LAN) 

Chapter 

15 

Viewer terminal 

(including a PC) 

DS-L4 

Using the viewer application on the 
viewer terminal to obtain the live 
image from the DS-L4 

Summary of Contents for DS-L4





































































































































































































Reviews:

No comments

Related manuals for DS-L4

zipwake S Series Troubleshooting Manual preview
S Series
Brand: zipwake Pages: 12
Watts 7 Series Installation, Maintenance & Repair preview
7 Series
Brand: Watts Pages: 2
jbc UCR Instruction Manual preview
UCR
Brand: jbc Pages: 12
Lawler 802 Installation & Maintenance Manual preview
802
Brand: Lawler Pages: 5
BADLANDS LE-03 Quick Manual preview
LE-03
Brand: BADLANDS Pages: 2
National Instruments 9853 Getting Started Manual preview
9853
Brand: National Instruments Pages: 29
IAI Msep First Step Manual preview
Msep
Brand: IAI Pages: 5
Watts 2300 Series Installation Instructions Manual preview
2300 Series
Brand: Watts Pages: 12
Lancom GS-1108 Manual preview
GS-1108
Brand: Lancom Pages: 8
RADEMACHER 2696 Instruction Manual For The Electrical Connection And For Commissioning preview
2696
Brand: RADEMACHER Pages: 48
S&P RMB Quick Start Manual preview
RMB
Brand: S&P Pages: 17
S&S Northern Merlin 1000VW+ Installation, Operating And Maintenance preview
Merlin 1000VW+
Brand: S&S Northern Pages: 9
SAI HVAC Compact Comfort VAV12 User Manual preview
Compact Comfort VAV12
Brand: SAI HVAC Pages: 16
saia-burgess PCD3 Series Hardware Manual preview
PCD3 Series
Brand: saia-burgess Pages: 203
Sailor N420 Technical Manual preview
N420
Brand: Sailor Pages: 1
Allen-Bradley Micro850 series Installation Instructions Manual preview
Micro850 series
Brand: Allen-Bradley Pages: 24
Grundfos IO 401 Installation And Operating Instructions Manual preview
IO 401
Brand: Grundfos Pages: 20
Rabbit microBLUE Instruction Manual preview
microBLUE
Brand: Rabbit Pages: 12

Brands by name

Popular brands

Load more brands