Nikon DS-L4 Instructions Manual Download Page 115

Page: 115 / 196

Chapter 11

Adding Lines and Annotations to an Image

107

Scale, Ann

ota

tion,

and Me

asur

ement

unctions

Adding scales and annotations to images

— TOOL MENU —

To display a scale, use [TOOL MENU: SCALE]. To add annotations, use [TOOL MENU: MEAS/DRAW].

Mouse

To perform fine operations, use a commercially available USB or Bluetooth mouse.

11.1

Displaying the [MEAS/DRAW] menu

Tap [MENU], and then tap the [MEAS/DRAW] tab in the tab menu.

Displaying the tab menu

If the tab menu is not displayed, tap the <> button in a menu screen.

Items displayed in [TOOL MENU: MEAS/DRAW]

The following shows the items displayed in [TOOL MENU: MEAS/DRAW].

Items displayed in [TOOL MENU: MEAS/DRAW]

Adding scales and annotations to images

Chapter

Button to show or hide the tab menu

Measurement buttons

Annotation buttons

Select button

Tap this button to select a displayed

measurement result or annotation you

want to edit (e.g., changing the color,

moving, or erasing).

[ERASE ALL] button

Erases all displayed measurement

results and annotations.

[CALIB] button

Tap this button to switch the

calibration setting.

[OVERLAY] button

Shows or hides the annotations and
measurement results.

[SAVE CSV] button

Exports the measurement results to a CSV file.

[TOOL SET] button

Tap this button to specify the annotation,
measurement, and scale settings. When you
tap this button, the [TOOL SET] submenu
appears. If you select an item in the submenu,
the menu for that item appears.

[X] (close) button

Closes the menu.

Summary of Contents for DS-L4





































































































































































































Search results

Summary of Contents for DS-L4

Reviews:

Related manuals for DS-L4

Brands by name

Popular brands

Nikon DS-L4, Instructions Manual

Search results

Summary of Contents for DS-L4

Reviews:

Related manuals for DS-L4

Brands by name

Popular brands