NEW BRUNSWICK SCIENTIFIC BioFlo 415, Manual To Operations

Page: 37 / 164

25
New Brunswick Scientific User’s Guide
BioFlo 415 System
Foam/Level
Two foam/level sensors are standard
Other Sensors
Options
Redox or second pH or second DO probe available
Pumps 1 & 2
Assignable peristaltic pumps
Fixed speed (12 RPM) or variable duty cycle
Available control modes: Off, Prime, Base, Acid,
Foam, Levl2 Wet or Lvl2 Dry.
Pumps
1
Pump 3
Assignable peristaltic pump
Fixed speed (100 RPM) or variable duty cycle
Available control modes: Off, Prime, Base, Acid,
Foam, Levl2 Wet or Lvl2 Dry.
Water
10 PSIG maximum, 50 μ m filtration
Utilities
Gas
20 PSIG (25 SLPM) maximum
Electrical Requirements
208-230 VAC, 50/60 Hertz, Single phase, 15 Amps
Net Weight Control Station
88 lbs. (40 kg) with touchscreen
Touchscreen
15 lbs. (6.8 kg)
7L 14L 19.5L
Vessel
without motor
2
47 lbs/21 kg 60 lbs/27 kg 80 lbs/36 kg
Overall Dimensions with
Touchscreen
25 in. wide X 24 in. deep X 34 in. high
(63 cm W X 61 cm D X 86 cm H)
External Computer Connections
Port supplied for remote connection of interface
computer
BioCommand Plus Connections
Port supplied for connection of
BioCommand Plus
supervisory host computer.
Fuses
One 5A glass tube, fast-acting fuse
Regulatory Compliance See Section 5.1
Ambient Operating Conditions
10-30
°
C, up to 80% relative humidity, non-condensing
1
See Table 9 (
Section 13.3
) for pump flow rates according to tubing size
2
Vessel weight does not include probes, exhaust condenser or other options.
5.1 Certifications
The BioFlo 415 has been tested to ETL standards, to comply with the safety standards:
ƒ UL 61010A-1
ƒ UL 61010A-2-010
ƒ CAN/CSA-C22.2 No. 1010.1
ƒ CAN/CSA-C22.2 No. 1010.2.010
As attested in the CE Declaration of Conformity reproduced on the following page, it
also conforms to the appropriate CE standards.