NEW BRUNSWICK SCIENTIFIC BioFlo 415, Manual To Operations

Page: 41 / 164

29
New Brunswick Scientific User’s Guide
Figure 11: Sample SUMMARY Screen
Table 2 identifies the other interactive features of the
SUMMARY screen:
Table 2: SUMMARY Screen Features
Parameter Column Description
LoopName Each unit comes with standard factory-assigned loops (e.g.,
Agitation, Temperature, pH, DO, etc.). There are also
unassigned loops available, to be named and set up by the
user when adding external equipment, for a maximum total
of 32 loops.
PV Process Variable: here the display reflects the current value
for each loop, in comparison to its setpoint (displayed in the
next column).
Setpoint The current setpoint (default or user-set) for each loop.
Out% The current percent output for each loop. This is an
automatic control function to maintain current readings
within the setpoint tolerance range.
Control Mode Depending on the loop, the control mode may be Off, Auto,
Manual, On, or O2 Enrich.
Unit (of measure) This is the unit of measure used for the PV and Setpoint.
Cascade If any cascades have been programmed, they will be
displayed here.
...continued...
SCROLL
DOWN
buttons
SCROLL UP
buttons
Current
DATE &TIME
SCREEN NAME
and ICON
Your
BioFlo 415
comes with
pre-assigned
loop names.
As you add
more, use the
SCROLL DOWN
buttons to see
them.
OPERATING
MODE
SCREEN ACCESS
buttons
Ö
#
NOTE: The dark blue button usually
represents the screen being displayed. Here it
shows a new screen, SYNOPTIC, accessible
from this screen (see Section 6.2.4 for details.
PHASE INDICATOR
VESSEL LIGHT
button: press
once to turn
light on for 10
minutes; press
again to turn off