NEW BRUNSWICK SCIENTIFIC BioFlo 415, Manual To Operations

Page: 44 / 164

32
BioFlo 415
y
M1360-0050 User’s Guide
6.2.6 Adding Loops
The BioFlo 415 comes to you with standard factory-assigned loops and the
possibility to add more loops, which are related to external auxiliary
equipment, added via standard analog and optional serial (RS232)
input/outputs located on the rear panel.
To add a new loop:
1. Scroll down in the SUMMARY screen beyond the last pre-assigned loop,
and press on a blank LoopName box.
2. The Add User-Defined Loop screen will open (
see Figure 14
).
Figure 14: Add User-Defined Loop Screen
Figure 14a: LoopName Touchpad
3. Press here and
use the touchpad
( see Figure 14a ) to
name the loop.
4. Press the
appropriate
option button.
The corresponding
measurement Unit
will automatically
appear (% in this
sample screen).
5. Press the
appropriate input
device designation.
6. Press the
appropriate output
device designation.
7. Input the desired
control settings.
8. After making all your
selections, press the
Õ
OK button to save
them.
Press
Caps Lock
to shift to
CAPITAL letters;
press it again to
shift back to
lower case.
Press
BackSp
to
backspace,
cancelling one
character at a time.
Press
Cancel
to
return to the GAUGE
screen
without saving
work done in the
Loop Name touchpad
screen.
Press
OK
to return to the GAUGE screen,
saving work done in the Loop Name
touchpad screen.
Press
Clear
to clear the LoopName
edit box in this screen,
allowing you to begin
again.