NEW BRUNSWICK SCIENTIFIC BioFlo 415, Manual To Operations

Page: 73 / 164

61
New Brunswick Scientific User’s Guide
1
1
0
0
G
G
E
E
T
T
T
T
I
I
N
N
G
G
S
S
T
T
A
A
R
R
T
T
E
E
D
D
10.1 Control Modes
A control mode is the logic by which a controller generates the desired control signal.
The operator has a choice of control modes, the most common of which are
ON
,
OFF ,
AUTO and MANUAL .
In cascaded control, one sensor influences an actuator that is normally associated with
a different sensor. The onscreen control mode choice will be the name of the loop
chosen to have influence on the actuator.
10.2 Pump Assignment
The user has the ability to assign each pump present in the system.
To assign a pump:
1.
From any screen, press the PUMPS button at the bottom to open the PUMP screen
(
see Figure 20
, repeated here for easy reference):
Figure 20: Pump Screen
2. Press the
pump’s
ASSIGNMENT
button to open
the Assignment
pane (see Figure
35).
NOTE: If there
are more than 3
pumps, use these
>>> and <<<
buttons to
navigate between
screens.