NEW BRUNSWICK SCIENTIFIC BioFlo 415, Manual To Operations

Page: 106 / 164

94
BioFlo 415
y
M1360-0050 User’s Guide
15.3.1 Resetting Date/Time
To reset the date and/or time (in the lower righthand corner of each screen):
1. In the System Settings screen press the edit box for the numeric parameter
you wish to change.
2. Use the pop-up touchpad to input the new number and press the OK button.
3. To change the month, press the down arrow (
T
) and press the month you
wish to select from its associated drop-down menu.
4. Press the Set button to save the new information. You can do this after
each change, or after all changes have been made.
15.3.2 Updating Software
Free updates are available on our corporate website ( www.nbsc.com ).
To update the system software, obtain a new version of the software in a USB
drive and plug the drive into the USB port on the control cabinet:
1. In the System Settings screen, press the Refresh button to update the
current software status and to search for a new USB drive.
2. The name of the new drive folder appears in the
Update File
box.
3. Press the Update button to install the file. The file will reboot twice; this
may take a little time.
4. The Software pane will reflect the changes.
Updating software will not affect any previous user settings.
15.4 Hardware Setup
The BioFlo 415 system you purchase is preset in the factory as “Unit1” with all the
accompanying hardware.
Press the fourth tab in the
SETUP screen to open the Hardware Setup screen. In the
Unit1 hardware list shown in the sample Hardware Setup screen (
Figure 58 on the
following page
), the system has the Base Power module, the Main Analog module and
the Auxiliary pH/DO module. This sample system is also set to NBS ModBus
communication mode (
see the SCADA pane in Figure 58
), and has the Unit ID number
of 6. This is the unit’s multidrop identification number.