NEC Super Script 4400 Maintenance Manual Download Page 187

Page: 187 / 317

178

SuperScript 4400 — Maintenance Guide

7.5.10 Waste Toner Sensor (WTS)

Tools

Phillips Screwdriver #1, #2

Disassembly Procedures

Remove the side cover (R). (See the item 7.1.3.)

Lift up the bottle holder. (Remove the waste toner sensor by removing the hooked pawl.)

Disconnect all the connectors connected with the waste toner sensor.

Assembly Procedures

Install a new waste toner sensor.

Connect the connectors with the waste toner sensor.

After the above, follow exactly the reverse order of disassembling procedures.

Waste Toner Sensor

Bottle Holder

Fram Ass'y

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands