NEC Super Script 4400, Maintenance Manual

Page: 309 / 317

14 Superscript 4200N and 4400 Series Maintenance Guide — Addendum
Line 1:
Line 2: PAPER MISMATCH
LOAD COM-10 TRAY Paper tray has papers but not the right type.
Line 1:
Line 2: PAPER MISMATCH
LOAD DL TRAY Paper tray has papers but not the right type.
Line 1:
Line 2: K-TONER EMPTY Black toner cartridge is empty
Line 1:
Line 2: Y-TONER EMPTY Yellow toner cartridge is empty.
Line 1:
Line 2: M-TONER EMPTY Magenta toner cartridge is empty.
Line 1:
Line 2: C-TONER EMPTY Cyan toner cartridge is empty.
Line 1:
Line 2: K-TONER
NOT FOUND Black toner cartridge is not installed or installed incorrectly.
Line 1:
Line 2: Y-TONER
NOT FOUND Yellow toner cartridge is not installed or installed incorrectly.
Line 1:
Line 2: M-TONER
NOT FOUND Magenta toner cartridge is not installed or installed incorrectly.
Line 1:
Line 2: C-TONER
NOT FOUND Cyan toner cartridge is not installed or installed incorrectly.
Line 1:
Line 2: PAPER JAM
DRUM Paper jam in drum area.
Line 1:
Line 2: PAPER JAM
INNER/DRUM Paper jam in inner area.
Line 1:
Line 2: PAPER JAM
EXIT/DRUM Paper jam in exit tray.
Line 1:
Line 2: MISFEED Paper misfeed.
Line 1:
Line 2: CHECK WASTE
TONER Waste toner bottle is full or is not installed.
Line 1:
Line 2: REPLACE FUSER
OIL Fuser oil runs out.
Line 1:
Line 2: REPLACE FUSER
ROLLER Fuser cleaning roller reaches end-of-life.
Line 1:
Line 2: MISPRINT
HW FAULT Printing error caused by no PRREQ-N within a page.
Line 1:
Line 2: BELT CARTRIDGE
NOT FOUND OPC belt cartridge is not installed.
Line 1:
Line 2: FUSER UNIT
NOT FOUND Fuser unit is not installed.
Line 1:
Line 2: FUSER ROLLER
NOT FOUND Fuser cleaning roller is not installed.
Line 1:
Line 2: FRONT COVER OPEN Front panel is open.
Line 1:
Line 2: BACK COVER OPEN Back panel (transfer unit) is open.
Message Explanation