NEC Super Script 4400 Maintenance Manual Download Page 202

Page: 202 / 317

Replacement Procedures for Maintenance Parts

193

PRINTER MAINTENANCE

7.6.8 Waste Toner Feeder D (Stay 'A' Assembly)

Tools

Phillips Screwdriver #2

Disassembly Procedures

Remove the photoconductor belt module.

Remove the toner module.

Remove the drum cleaner.

Remove the side cover (LU). (See the item 7.1.1.)

Remove the top cover. (See the item 7.1.4.)

Remove the control fan assembly. (See the item 7.3.5.)

Remove the set screw ST3 6 (2 pcs.) of stay 'A'.

Disconnect the connector connected with the belt sensor.

Pull up the stay 'A' assembly along the guide.

Assembly Procedures

Install the new stay 'A' assembly.

After the above, follow exactly the reverse order of disassembling procedures.

Caution!

Do not touch or scratch the transfer drum.

Do not deform the sealing mylar of waste toner feeder D.

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands