NEC Super Script 4400 Maintenance Manual Download Page 240

Page: 240 / 317

Imaging Artifacts

231

TROUBLESHOO

TING

18. Toner Streak -

Brush mark line of uneven optical density is caused in the image.

Main Causes

Main blade of the developer unit and the reset roller is not normal

Location of the toner module is not correct.

Transport paddle in the toner module is deformed.

Brush mark line appears in the continuous printing of high coverage (solid) pattern.

Countermeasures

Reseat the toner module.

Remove the toner module and rock it left to right.

Replace the toner module. (See Chapter 6)

OPC Belt Cartridge

Drum Cleaner

Toner Module
K(Black)
Y(Yellow)
M(Magenta)
C(Cyan)

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands