NEC Super Script 4400 Maintenance Manual Download Page 2 | Manualshive

Page: 2 / 317

background image

0

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is the valuable property of
NEC Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to
this document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent
said rights are expressly granted to others.

The NEC Technologies product(s) discussed in this document are warranted in accordance with the terms of the
Limited Warranty Statement accompanying each product. However, actual performance of each such product is
dependent upon factors such as system configuration, customer data and operator control. Since implementation
by customers of each product may vary, the suitability of specific product configurations and applications must be
determined by the customer and is not warranted by NEC Technologies.

To allow for design and specification improvements, the information in this document is subject to change at any
time without notice. Reproduction of this document or portions thereof without prior approval of NEC
Technologies is prohibited.

© NEC Technologies, Inc., 1998.

Microsoft, Windows, Windows 95, Windows 98,
Windows NT, Windows for Workgroups, and MS-DOS are registered trademarks of Microsoft Corporation.

Adobe PostScript

®

3 is a trademark of Adobe Systems Incorporated.

All other product, service, brand, or trade names used in this publication are the trademarks or registered
trademarks of their respective companies or organizations. NEC disclaims any responsibility for specifying which
marks are owned by which companies or organizations.

Copyright 1998
NEC Technologies, Inc.
1250 N. Arlington Heights Rd.
Itasca, IL 60143
All Rights Reserved.

Copyright 1998
NEC Corporation
7-1 Shiba 5-Chome, Minato-Ku
Tokyo 108-01, Japan
All Rights Reserved.

«
1
2
3
4
...
»

Summary of Contents for Super Script 4400






























































































































































































































































































































Reviews:

No comments

Related manuals for Super Script 4400

Brand: NCR Pages: 10

Brand: DASCO Pages: 2

Brand: Partner Pages: 9

SCX 4500W - Personal Wireless Laser Multi-Function...

Brand: Samsung Pages: 113

imageRUNNER ADVANCE 8105

Brand: Canon Pages: 5

imageCLASS MF269dw

Brand: Canon Pages: 32

Brand: Samsung Pages: 158

Brand: GCC Technologies Pages: 97

Brand: Dascom Pages: 146

Brand: Sagem Pages: 126

Brand: Oce Pages: 268

Brand: Radio Shack Pages: 42

490ST - Document Centre B/W Laser Printer

Brand: Xerox Pages: 322

Brand: Oce Pages: 32

WorkCentre Pro 421

Brand: Xerox Pages: 162

Brand: Ricoh Pages: 2

GADOSO REVOLUTION 2

Brand: WANHAO Pages: 51

Brand: FujiFilm Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands