NEC Super Script 4400 Maintenance Manual Download Page 132

Page: 132 / 317

Replacement Procedures for Maintenance Parts

123

PRINTER MAINTENANCE

7.1.4 Top Cover

Tools

Phillips Screwdriver #2

Disassembly Procedures

Open the paper exit unit and the front cover Unit.

Remove the side cover (LU). (See the item 7.1.1)

Remove the side cover (L) and side cover (R). (See the item
7.1.2 and 7.1.3.)

Remove the operator panel assembly. (One BT4 8 screw and
one connector to be removed.)

Remove the set screw BT4 8 (3 pcs.) of top cover. (Top side 2
and Right side 1)

Slightly lift up the upper side of top cover.

Pull the top cover toward you, and unhook the hook from the
frame.

Assembly Procedures

Prepare a new top cover.

Assemble the top cover according to the reverse order of disassembling.

Top Cover

Connector

Operator Panel

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands