250
SuperScript 4400 — Maintenance Guide
LCD Message
Explanation
Booting…
First message to appear when the printer is powered up.
OUT OF PAPER
One of the paper trays is empty
TRAY 2 UNSUPPORTED SIZE
Lower tray contains paper size that is not supported by engine.
PAPER MISMATCH LOAD
<Paper Size> TRAY
Paper tray does not have the correct paper size as specified for
the print job. Load the paper size shown on the display <Letter,
Legal, A4, B5JIS, B5ISO, EXEC, FOLIO, FSCAP, SPFOLI,
QUARTO, COM-10, or DL>.
<K, Y, M, or C> TONER EMPTY
Specified toner module is empty. Replace it with a new one.
<K, Y, M, or C> TONER NOT FOUND
Specified toner module is not installed or installed incorrectly.
Reinstall it.
PAPER JAM DRUM
Paper jam in drum area.
PAPER JAM INNER/DRUM
Paper jam in inner area.
PAPER JAM EXIT/DRUM
Paper jam in exit tray.
MISFEED
Paper misfeed.
CHECK WASTE TONER
Waste toner pack is full or is not installed.
REPLACE FUSER OIL
Fuser oil has run out.
REPLACE FUSER ROLLER
Fuser cleaning roller needs to be replaced.
MISPRINT HW FAULT
Printing error caused by no PRREQ-N within a page. ???
photoconductor belt module NOT
FOUND
Photoconductor Belt Module photoconductor belt module is not
installed.
FUSER UNIT NOT FOUND
Fuser unit is not installed.
FUSER ROLLER NOT FOUND
Fuser cleaning roller is not installed.
FRONT COVER OPEN
Front Cover is open.
BACK COVER OPEN
Back Cover (transfer unit) is open.
TOP COVER OPEN
Top Cover is open.
LOW FUSER OIL
Fuser cleaning unit has about 30 pages of operation remaining.
NEAR END FUSER ROLLER
Fuser cleaning roller has about 1000 pages of operation
remaining.
REPLACE BELT
Photoconductor Belt Module photoconductor belt module worn
out.
REPLACE FUSER UNIT
Fuser unit reaches end-of-life.
K-TONER LOW
Black Toner Module has less than 300 pages of operation
remaining.
<Y, M, or C> TONER LOW
Specified Toner Module has less than 500 pages of operation
remaining.
120K SERVICE
Paper discharge, drum cleaner, transfer roller, transfer drum,
and paper pick-up roller all need to be replaced.
CASSETTE OUT <TRAY 1 or 2>
Cassette is not installed in Paper Tray 1 or 2.
MEDIA MISMATCH LOAD <MEDIA>
TRAY
Tray does not have the correct media as specified for the print
job. Load the media shown on the display <Paper, Label, or
OHT (Over Head Transparency)>.
Summary of Contents for Super Script 4400
