NEC Super Script 4400, Maintenance Manual

Page: 87 / 317

78 SuperScript 4400 — Maintenance Guide
Removing Peer to Peer Software
You should delete all printers which have been installed to use peer to peer printing before you delete the peer to
peer software. Follow these steps.
1.
Press the Windows Start button, select Settings , then select Printers .
2. In the Printers window, select a printer to delete.
3. Select Delete from the File menu.
Removing
P2P-IP
To remove the IP peer to peer software from your computer, use the Add/Remove Programs control panel.
1. Press the Windows Start button, select Settings , then select Control Panel .
2. Open Add/Remove Programs . Select P2P-IP in the list and click Remove .
Removing PeerToPeer-IPX
To remove the IPX peer to peer software from your computer, use the PeerToPeer-IPX Uninstall program. Follow
these steps.
1.
Insert the 4400 xxxxx CD into the drive.
2. Press the Windows Start button and select Run .
3. At Run, type: xxxx???
<drive>:\IPX-P2P\UNINSTAL.EXE
Then click OK .
Follow the Uninstall wizard prompts. When removal is complete, click OK .
Setting lpr Printing on an NT Network
The following procedure can be used to set up the lpr spooler for a Windows NT 4.0 workstation/server.
1. In the Windows Network control panel, install the Microsoft TCP/IP Printing service.
2. Use the Windows Add Printer wizard to install the SuperScript 4400 printer driver for Windows NT 4.0.
note:
SuperScript 4400 printer drivers are provided on the Solutions CD that comes with the 4400 printer.
3. In Windows NT 4.0, click the Start button, select Settings , then select Printers .
4. Select the NEC SuperScript 4400 printer icon, and then select Properties from the File menu .
5. Click on the Ports tab (the SuperScript 4400 driver installs to LPT1 by default).
6. Then select Add Port .
7. Under Available Printer Port select LPR Port and click the New Port button.
8. In the Name or address of server providing lpd field, enter the IP (Protocol) address of the printer, for
example, 128.191.184.50. Then click OK .
9. In the Name of printer or print queue on that server field, enter PORT1 (the word “PORT” must be in
uppercase). Click OK , then click Close to assign that newly created port to the SuperScript 4400.
10. Click on the Sharing tab in the NEC SuperScript 4400 Properties window .
11. Click on the radio button Shared and enter a name for your SuperScript 4400 printer.
12. Click OK to apply these settings to your printer.