NEC Super Script 4400, Maintenance Manual

Page: 80 / 317

Using MAP 71
NE
TW
OR
K PR
INTING
U
SING
MAP
The Management Access Program (MAP), runs only under Windows 95/98 and Windows NT 4.0. You use MAP to
list SuperScript 4400 network printers connected to your network. Then you select one to go to its Network
Administration Page for network administration options.
MAP Operating Requirements
To use MAP, you must have installed on your PC
•
Netscape Navigator or Internet Explorer
• The Microsoft TCP/IP protocol stack, if printer is going to support TCP/IP.
For IPX Search Functions: The IPX protocol must be installed and enabled on your PC. Both Microsoft and
the NetWare 32-bit stacks are supported. You must log in to the Novell Server.
For IP Peer to Peer Printing: Both your workstation and printer must have an IP address and subnet mask
entered. If communicating across subnets, the default gateway must also be identified.
For IPX Peer to Peer Printing:
Your PC must have the IPX/SPX compatible protocol installed and enabled.
Installing MAP
MAP is available on the SuperScript 4400 Series CD that comes with your printer. MAP must be installed from
Windows 95/98 or Windows NT 4.0. It cannot be installed from the
MS-DOS
®
command prompt.
a. Insert the SuperScript 4400 Series CD.
b. Use the Administrator installation option to install the MAP utility.