NEC Super Script 4400 Maintenance Manual Download Page 208

Page: 208 / 317

Replacement Procedures for Maintenance Parts

199

PRINTER MAINTENANCE

7.7.2 Fuser Roller

Tools

Phillips Screwdriver #1, #2

Disassembly Procedures : See the layout of fuser unit parts.

Remove the fusing heater lamp (400W).(See the item 7.7.1.)

Remove the set screw FST3X10 (1 pcs.) of F. terminal (R), and remove F. terminal (R)

Remove the set screw ST3X6 (2 pcs.) of oil pan.

Remove the oil pan.

Remove the set screw ST3X6 (2 pcs.) of frame assembly.

Open the upper face of frame assembly.

Remove the fuser roller from the frame.

Assembly Procedures

Install a new fuser roller to the frame.

After the above, follow exactly the reverse order of disassembling procedures.

Caution!

Do not touch the surface of fuser roller with bare hands.

Do not let any foreign particle such as debris adhere to the surface of fuser roller.

Frame (L)

B.B

Fuser Roller

Frame (R)

B.B

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands