NEC Super Script 4400 Maintenance Manual Download Page 131

Page: 131 / 317

122

SuperScript 4400 — Maintenance Guide

7.1.3 Side Cover (L)

Tools

Phillips Screwdriver #2

Disassembly Procedures

Open the paper exit unit.

Remove the side cover (LU). (See the item 7.1.1.)

Remove the set screw BT4 8 (2 pcs.) of side cover (L).

Remove the side cover (L). (Slowly pull up the side cover
(L), and unhook the hook from the top cover.)

Assembly Procedures

Prepare a new side cover (L).

Assemble the side cover (L) according to the reverse order
of disassembling.

Top Cover

Side Cover(L)

Operator Panel

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands