NEC Super Script 4400 Maintenance Manual Download Page 137

Page: 137 / 317

128

SuperScript 4400 — Maintenance Guide

7.1.9 Base Cover (R)

Tools

Phillips Screwdriver #2

Disassembly Procedures

Remove the side cover (R). (See the item 7.1.3)

Remove the set screw BT4 8 (2 pcs.) of base cover (R).

Remove the base cover (R) from the base.

Assembly Procedures

Prepare a new base cover (R).

Assemble the base cover (R) according to the reverse order
of disassembling.

Caution!

When assembling the base cover, insert the

leading edge of base cover (R) into the hook provided at
the bottom (left and right) of the base plate.

Have the projecting part of base cover (R) meet the hole
of base plate bottom.

Base Cover(R)

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands