NEC Super Script 4400 Maintenance Manual Download Page 35

Page: 35 / 317

SuperScript 4400 — Maintenance Guide

PERATOR

ANEL

EATURES

Indicator Lights

The indicator lights on the Operator Panel communicate the operating status of the printer

Light

Mode

Status

Power

Printer power is on or in POWER SAVE
mode.

(Green)

Off

Printer power is off.

Warning

Call for service (see page115).

(Red)

Off

Normal state, no action is required.

Blinking

The printer has a problem. See the
message display. If there is no
message, call for service (see
page115).

Online

Printer is online and ready to print.

(Green)

Off

Printer is offline or in menu mode.

Blinking

Printer is warming up.

Data

Print buffer contains data.

(Orange)

Off

Print job has ended or print buffer has
been cleared by pressing the Feed
button.

Blinking

Data is being sent to the printer.

OHT

(Green)

Off

Media type is set to Over Head
Transparency (OHT).

Media type is not set to OHT.

Label

(Green)

Off

Media type is set to Label.

Media type is not set to Label.

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands