NEC Super Script 4400, Maintenance Manual

Page: 284 / 317

Moving Your Printer Locally XI
APPENDIX D
MOVING YOUR PRINTER
This appendix gives you directions on how to safely move or ship your printer. Please follow these instructions
carefully. Failure to do so may result in damage to the printer.
M
OVING
Y
OUR
P
RINTER
L
OCALLY
To move the printer locally means that it can either be carried by two people or moved on a cart to its new location.
Follow these steps:
1. Turn the printer off and allow it to cool for 15 minutes.
2. Remove any cables, plugs, and paper trays.
3. Remove the optional Paper Tray 2 Unit if attached.
4. Open the Top Cover (A) .
5. Open the Lock Tabs inside (B) .
6. Carefully remove the Oil Bottle (C) .
note:
Hold a sheet of paper under the Oil Bottle so no oil drips back into the printer.
7. Place the Oil Bottle in an oil-proof container, such as a plastic bag, until you are ready to reinstall it.
8. Use the Oil Syringe provided with your printer (or an eye dropper) to remove any excess oil from the fuser
area. Deposit in plastic dish and discard
(D) .
9. Clean out any extra oil residue with several paper towels (E) . If you are also shipping the printer, fill the space
normally occupied by the Oil Bottle with paper towels to absorb any residual oil during shipment.
10. Close the Locking Tabs and Top Cover (F) .
11. Two adults should lift the printer unto a sturdy, level cart (G) .
12. Move the printer to its new location.
13. Connect the interface cables (
H) .
14. Open the Top Cover and remove any paper towels from the fuser area ( I) .
A
B
C
D
WARNING!
The printer must be kept
level at all times unless ALL oil is
removed.
E