NEC Super Script 4400 Maintenance Manual Download Page 160

Page: 160 / 317

Replacement Procedures for Maintenance Parts

151

PRINTER MAINTENANCE

7.3.6 Ozone Fan (OZFAN)

Tools

Phillips Screwdriver #1, #2

Disassembly Procedures

Remove the toner module.

Remove the side cover (R). (See the item 7.1.3.)

Remove the IOD2 Circut Card. (See the item 7.2.3.)

Remove the harness guide.

Remove the connector to be connected to the developer drive motor.

Remove the set screw ST3 6 (2 pcs.) of developer gear unit.

Remove the developer drive unit.

Set the waste toner feeder to be nearly up right position.

Remove the set screw ST3 6 (1 pc.) of fan case.

10. Remove the fan case.
11. Remove the fan motor from the fan case.

Assembly Procedures

Install a new fan motor to the fan case.

After the above , follow exactly the reverse order of disassembling procedures.

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands