NEC Super Script 4400 Maintenance Manual Download Page 130

Page: 130 / 317

Replacement Procedures for Maintenance Parts

121

PRINTER MAINTENANCE

7.1.2 Side Cover (R)

Tools

Phillips Screwdriver #2

Disassembly Procedures

Open the front cover unit.

Remove the set screw BT4 X8 (1 pc.) of side cover (R) at the rear
side. (Fig.7-3)

Slide the side cover (R) to the arrow direction. (Fig.7-4)

Remove the side cover (R).

Assembly Procedures

Prepare a new side cover (R).

Assemble the side cover (R) according to the reverse order of disassembling.

Side Cover(R)

Front Cover Unit

Side Cover(R)

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands