NEC Super Script 4400 Maintenance Manual Download Page 183

Page: 183 / 317

174

SuperScript 4400 — Maintenance Guide

7.5.6 Drum Jam Sensor (DPJ)

Tools

Phillips Screwdriver #1, #2

Disassembly Procedures

Remove the fuser unit.

Remove the photoconductor belt module.

Remove the drum cleaner.

Remove the transfer drum. (See the item 7.6.3.)

Remove the sensor cover.

Disconnect all the connectors connected with the drum jam sensor.

Remove the drum jam sensor from the stay B.

Assembly Procedures

Install a new drum jam sensor (DPJ) to the stay B.

After the above, follow exactly the reverse order of disassembling procedures.

Oil Sensor

Cover F

Drum Jam Sensor

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands