NEC Super Script 4400 Maintenance Manual Download Page 158

Page: 158 / 317

Replacement Procedures for Maintenance Parts

149

PRINTER MAINTENANCE

7.3.4 Control Fan (CTFAN)

Tools

Phillips Screwdriver #1, #2

Disassembly Procedures

Remove the side cover (LU). (See the item 7.1.1.)

Remove the side cover (L). (See the item 7.1.2.)

Remove the top cover. (See the item 7.1.4.)

Remove the set screw ST3 6 (3 pcs.), and shield cover
(upper).

Disconnect all the fan motor harness connectors.

Remove the set screw ST3 6 (2 pcs.) of fan case
assembly.

Remove the fan motor from the fan case assembly.

Assembly Procedures

Install a new fan motor to the fan case.

Install the fan duct assembly to the main body.

After the above , follow exactly the reverse order of
disassembling procedures.

Upon completion of the installation, connect the power
supply cable.

Turn the power supply switch ON.

Execute the test print in Service Mode.

Confirm the operation and print quality.

Controller Fan

Interlock Switch
(Front)

Fan Case

Fan Motor

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands