NEC Super Script 4400 Maintenance Manual Download Page 173

Page: 173 / 317

164

SuperScript 4400 — Maintenance Guide

7.5.1-2 Interlock Switch (Top) (for Paper Exit Unit)

Tools

Phillips Screwdriver #1, #2

Disassembly Procedures

Remove the side cover (LU). (See the item 7.1.1.)

Remove the top cover. (See the item 7.1.4.)

Remove the set screw ST3 6 (2 pcs.), and the control fan assembly.

Remove the set screw BT3 8 (1 pc.), and switch base from the control fan assembly.

Remove the connector.

Remove the switch from the switch base.

Assembly Procedures

Install a new switch to the switch base.

After the above, follow exactly the reverse order of disassembling procedures.

Caution!

Since the interlock switch is an important part for the safety, confirm after installation that the

switch operates normally.

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands