NEC Super Script 4400 Maintenance Manual Download Page 196 | Manualshive

Page: 196 / 317

background image

Replacement Procedures for Maintenance Parts

187

PRINTER MAINTENANCE

7.6.5 Front Cover Unit

Tools

Phillips Screwdriver #1, #2

Disassembly Procedures

1.

Remove the side cover (L).(See the item 7.1.2.)

2.

Remove the base cover (L). (See the item 7.1.10.)

3.

Open the front cover unit.

4.

Remove the set screw BT4 8 (2 pcs.) of front cover (inner).

5.

Remove the coupling arm of waster toner tray.

6.

Release the hinge holder of hinge arm's fixing pin.

7.

Remove the fixing pin, and remove the coupling of hinge arm.

8.

Remove the front cover (inner).

9.

Disconnect all the harness connectors connected with the developer position sensor and developer solenoid.

10.  Remove the set screw ST3   6 (2 pcs.) of front hinge (L).
11.  Remove the front hinge (L) from the frame.
12.  Sliding the front cover unit to the right side, remove the coupling of hinge's fixing pin at the right side.

Assembly Procedures

1.

Prepare a new front cover unit assembly.

2.

Couple the hinge pin of right side with the front cover unit.

3.

Have the hook of left front hinge (L) meet the frame, hook the left front hinge.

4.

Fix the front hinge (L) by screwing.

5.

Couple the hinge arm to the front cover with the fixing pin.

6.

Lock the fixing pin with the hinge holder.

7.

After the above, follow exactly the reverse order of disassembling procedures.

«
...
194
195
196
197
198
...
»

Summary of Contents for Super Script 4400






























































































































































































































































































































Reviews:

No comments

Related manuals for Super Script 4400

Brand: Xerox Pages: 8

Brand: Datamax Pages: 2

Brand: Oki Pages: 320

Brand: Xerox Pages: 55

Brand: ColorGATE Pages: 6

Brand: Konica Minolta Pages: 36

Brand: Xerox Pages: 2

Brand: Epson Pages: 144

Brand: Epson Pages: 228

Brand: Epson Pages: 350

Brand: Epson Pages: 365

Brand: Epson Pages: 350

Brand: Epson Pages: 387

DPR-1260 - RangeBooster G Multifunction Print Server

Brand: D-Link Pages: 55

Brand: D-Link Pages: 49

Virtuoso SG400EU

Brand: Sawgrass Pages: 135

Brand: CAB Pages: 222

MultiXpress C9201NA

Brand: Samsung Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands