NEC Super Script 4400 Maintenance Manual Download Page 58

Page: 58 / 317

Windows 3.x

PRINTER DRIVERS

Windows 3.x - PCL 5e Printer Driver

Click

to save changes and close the driver.

Click the

Help

button

to view the complete Help file.

Click

Cancel

to discard changes and close the driver.

The PCL 5e printer driver window has general document settings. Press the

Options

button to display more settings for adjusting graphic output.

Click

About

to view version and copyright information.

NEED NEW SHOT

Summary of Contents for Super Script 4400






























































































































































































































































































































Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands

NEC Super Script 4400, Maintenance Manual

Search results

Summary of Contents for Super Script 4400

Reviews:

Related manuals for Super Script 4400

Brands by name

Popular brands