48 - 10
48. CONNECTION TO FUJI TEMPERATURE CONTROLLER
48.5 Temperature Controller Side Setting
(2) Settings of data length, parity bit, stop bit, master/
slave device and echoback
48.5.8 Station number setting
Set each station number so that no station number overlaps.
The station number can be set without regard to the cable
connection order. There is no problem even if station numbers
are not consecutive.
(1) Direct specification
When setting the device, specify the station number of the
temperature controller of which data is to be changed.
POINT
POINT
POINT
Specifying a station No. between 200 and 215
(Example of specifying the station No. 215)
1.
Set the station No. to "200".
2.
Input "215" to the internal device GD10.
3.
The station No. 215 is specified.
For details, refer to (2) Indirect specification shown
below.
(2) Indirect specification
When setting the device, indirectly specify the station number
of the temperature controller of which data is to be changed
using the 16-bit GOT internal data register (GD10 to GD25).
When specifying the station No. from 200 to 215 on GT
Designer3, the value of GD10 to GD25 compatible to the
station No. specification will be the station No. of the
temperature controller.
Setting item
Set value
Switch No.
4
5
6
7
8
9
0
Stop bit
1bit
ON
Parity bit
Even
OFF OFF
Odd
ON
OFF
None
OFF
ON
Communication
Type
RS-232C
RS-485
OFF OFF
Echo back
Without
OFF
ON
SW
Set these switches.
Specification range
1 to 199
216 to 255
Specification
station NO.
Compatible
device
Setting range
200
GD10
1 to 255
For the setting other than the above, error
(dedicated device is out of range) will
occur.
201
GD11
202
GD12
203
GD13
204
GD14
205
GD15
206
GD16
207
GD17
208
GD18
209
GD19
210
GD20
211
GD21
212
GD22
213
GD23
214
GD24
215
GD25
GOT
Station
No.3
Station
No.7
Station
No.1
Station
No.15
Station
No.6
Examples of station number setting
Summary of Contents for GT16
