Mitsubishi Electric GT16, User Manual

Page: 882 / 1306

40 - 14
40. CONNECTION TO CHINO CONTROLLER
40.5 Controller Side Setting
40.5.8 Connecting to SE3000

Key Lock setting
To write the Digital and the Analog parameters, set the
Key Lock setting.

Communication settings
Make the communication settings using the
engineering software package(PASS)
*1 Avoid duplication of the station No. with any of the other units.
*2 Adjust the settings with GOT settings.
*3 Instrument No. and Transmission speed can also be set by
switch SW1.

Setting by Switch(SW1)
Station No. and Transmission speed can be set.
(1)
Station No.
(2) Transmission speed

Setting by Switch(SW2)
40.5.9 Connecting to JU

Key Lock setting
To write the Digital and the Analog parameters, set the
Key Lock setting.

Communication settings
Set the communication settings with controller key
operation.
*1 Avoid duplication of the station No. with any of the other units.
*2 Adjust the settings with GOT settings.
Item Set value
Protocol MODBUS RTU
Station No.
*1*3
1 to 31
Transmission speed
*2*3
9600bps, 19200bps
Data length 8bit (fixed)
Parity bit
*2
Even, Odd, Non
Stop bit
*2
1bit, 2bit
Transmission code Binary (fixed)
Error check CRC-16 (fixed)
SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 Station No.
OFF OFF OFF OFF OFF 1
ON OFF OFF OFF OFF 1
OFF ON OFF OFF OFF 2
ON ON OFF OFF OFF 3
:
ON OFF ON ON ON 29
OFF ON ON ON ON 30
ON ON ON ON ON 31
SW1-6 SW1-7 Communication port Transmission speed
OFF OFF Upper communication 9600bps
OFF ON Upper communication 19200bps
ON OFF ENG -
ON ON User setting inhibited
12
3
ON
45678
SW1
SW2
Front side (Terminal side) Back side(DIN rail side)
RS232C RS422A/485
Item Set value
Protocol rtU
Station No.
*1
1 to 99
Transmission speed
*2
9600bps, 19200bps
Character
*2
(Bit length, Parity bit, Stop bit)
[8N1]: 8bit, None, 1bit
[8N2]: 8bit, None, 2bit
[8E1]: 8bit, Even, 1bit
[8E2]: 8bit, Even, 2bit
[8O1]: 8bit, Odd, 1bit
[8O2]: 8bit, Odd, 2bit
DIN rail side
Upside
422A
/485
232C
Terminal side