Mitsubishi Electric GT16, User Manual

Page: 654 / 1306

29 - 6
29. GOT MULTI-DROP CONNECTION
29.5 Setting of Serial Multi-Drop Connection Unit
29.5 Setting of Serial Multi-Drop Connection Unit
29.5.1 Write the OS
Write the standard monitor OS and communication
driver according to the desired connection type onto the
serial multi-drop connection unit.
For the OS writing methods, refer to the following
manual.
GT Designer3 Version1 Screen Design Manual
1.
Check-mark a communication driver according to the
desired connection type and click the [Write] button.
29.5.2 Setting communication
interface (Communication
settings)
Make the Serial Multi-Drop Connection Unit interface
setting on [Communication with GT01-RS4-M] of GT
Designer 3.
For the communication interface driver, set the same
communication driver as the serial multi-drop
connection.
For details on [Communication with GT01-RS4-M] of
GT Designer3, refer to the manuals.
GT Designer3 Version1 Screen Design Manual

Controller setting
1.
Set the following to the driver for the connected
equipment.
• Connection type dependent
The driver for connection with the GOT is fixed to the
following one.
• Multi-drop(Host)
2.
Perform the detailed settings for the driver.
■ Communication detail settings
3.
Set [Use the system information of Multidrop] as
necessary.
■ Setting the multi-drop system information
function
4.
Click the [Write] button when settings are completed.
1.
Click!