Mitsubishi Electric GT16, User Manual

Page: 899 / 1306

42. CONNECTION TO TOSHIBA MACHINE PLC
42.4 GOT Side Settings
42 - 3
36
CONNECTION T
O
KO
YO EI
P
L
C
37
CONNECTION T
O
JT
EKT PLC
38
CONNECTION T
O
SHA
R
P P
LC
39
CONN
ECT
ION T
O
SHIN
KO
TE
CHNOS
INDI
CA
TI
NG
CONT
ROL
LER
40
CON
N
E
C
T
ION T
O
CHINO CON
T
ROLLER
41
CONNECTION
T
O
T
O
SHI
BA PLC
42
C
O
NNECTION T
O
T
O
SHI
BA MACHI
NE
PLC
43
CONNECTION T
O
P
A
NASO
NIC SER
V
O
AMPLI
F
IE
R
42.4 GOT Side Settings
42.4.1 Setting communication interface
(Communication settings)
Set the channel of the equipment connected to the GOT.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: TOSHIBA MACHINE
• Controller Type: TOSHIBA MACHINE TCmini
• I/F: Interface to be used
• Driver: TOSHIBA MACHINE TCmini
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
42.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
17.1.2 I/F communication setting
42.4.2 Communication detail settings
Make the settings according to the usage environment.
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following.
12. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
2.
3.
4.
Click!
Item Description Range
Transmission
Speed
Set this item when change the
transmission speed used for
communication with the connected
equipment.
(Default: 9600bps) 9600bps,
19200bps,
38400bps,
57600bps,
115200bps
Data Bit
Set this item when change the data
length used for communication with
the connected equipment.
(Default: 8bit)
7bits/8bits
Stop Bit
Specify the stop bit length for
communications.
(Default: 2bits)
1bit/2bits
Parity
Specify whether or not to perform a
parity check, and how it is
performed during communication.
(Default: None)
None
Even
Odd
Retry
Set the number of retries to be
performed when a communication
error occurs.
(Default: 3times)
0 to 5times
Timeout Time
Set the time period for a
communication to time out.
(Default: 3sec)
3 to 30sec
Host Address
Specify the host address (station
No. of the GOT to which the PLC is
connected) in the connected
network.
(Default: 0)
0 to 63
Delay Time
Set this item to adjust the
transmission timing of the
communication request from the
GOT.
(Default: 0ms)
0 to 300(ms)