Mitsubishi Electric GT16, User Manual

Page: 1000 / 1306

50 - 8
50. CONNECTION TO YOKOGAWA PLC
50.2 Serial Connection
50.2.6 PLC side setting
POINT POINT POINT
YOKOGAWA PLC
For details of YOKOGAWA PLCs, refer to the
following manuals.
YOKOGAWA PLC user's Manual
50.2.7 Connecting to CPU port/D-sub
9-pin conversion cable, SIO
port adapter cable

Setting of PLC CPU
Make the PLC CPU settings, displaying [Configuration]
[Communication Settings] with the program
development tool or the ladder-programming tool.
*1 The communication mode that can be selected differs
according to the CPU.
Model name Refer to
CPU port/D-Sub 9-pin
conversion cable
KM10-0C
50.2.7
SIO port adapter cable KM10-0S
PC link module
F3LC01-1N
50.2.8 F3LC11-1N
F3LC11-2N
F3LC11-1F
50.2.9
F3LC12-1F
LC01-0N
50.2.10
LC02-0N
STARDOM 50.2.11
Item Set value
Communication
mode
*1
Set the communication mode of the CPU (transmission
speed and data format).
Set the transmission speed and data format according
to settings of the transmission speed, data length, parity
and stop bit on the GOT side.
Item
Transmission speed and data format
Transmis
sion
speed
Data bit Parity Stop bit
Communicati
on mode 0 9600
bps
8bits Even 1bit
Communicati
on mode 1 9600
bps
8bits None 1bit
Communicati
on mode 2 19200
bps
8bits Even 1bit
Communicati
on mode 3 19200
bps
8bits None 1bit
Communicati
on mode 4 38400
bps
8bits Even 1bit
Communicati
on mode 5 38400
bps
8bits None 1bit
Communicati
on mode 6 57600
bps
8bits Even 1bit
Communicati
on mode 7 57600
bps
8bits None 1bit
Communicati
on mode 8 115200
bps
8bits Even 1bit
Communicati
on mode 9 115200
bps
8bits None 1bit
CPU PC link
function settings
Set the following when using the CPU programming
port as the PC link function.
Make the checksum setting according to the sum check
setting on the GOT side.
Item Set value
Use of PC link function Mark. (Use enabled)
Checksum
Mark. (ON) Do not mark.
(OFF)
End character Do not mark. (OFF)
Protect function Do not mark. (OFF)