Mitsubishi Electric GT16, User Manual

Page: 1303 / 1306

WARRANTY
Please check the following product warranty details before using this product.
If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the product within the
gratis warranty term, the product shall be repaired at no cost via the sales representative or Mitsubishi Service Company.
However, if repairs are required onsite at domestic or overseas location, expenses to send an engineer will be solely at the customer's
discretion.
Mitsubishi shall not be held responsible for any re-commissioning, maintenance, or testing on-site that involves replacement of the
failed module.
The gratis warranty term of the product shall be for thirty-six (36) months after the date of purchase or delivery to a designated
place.
Note that after manufacture and shipment from Mitsubishi, the maximum distribution period shall be six (6) months, and the longest
gratis warranty term after manufacturing shall be forty-two (42) months.
The gratis warranty term of repair parts shall not exceed the gratis warranty term before repairs.
• Failure occurring from inappropriate storage or handling, carelessness or negligence by the user. Failure caused by the user's
hardware or software design.
• Failure caused by unapproved modifications, etc., to the product by the user.
• When the Mitsubishi product is assembled into a user's device, Failure that could have been avoided if functions or structures,
judged as necessary in the legal safety measures the user's device is subject to or as necessary by industry standards, had
been provided.
• Failure that could have been avoided if consumable parts designated in the instruction manual had been correctly serviced or
replaced.
• Replacing consumable parts such as a battery, backlight, and fuse.
• Failure caused by external irresistible forces such as fires or abnormal voltages, and Failure caused by force majeure such as
earthquakes, lightning, wind and water damage.
• Failure caused by reasons that could not be predicted by scientific technology standards at the time of shipment from
Mitsubishi.
• Any other failure found not to be the responsibility of Mitsubishi or that admitted not to be so by the user.
(1) Gratis Warranty Term
(2) Gratis Warranty Range
(a) The customer shall be responsible for the primary failure diagnosis unless otherwise specified.
If requested by the customer, Mitsubishi Electric Corporation or its representative firm may carry out the primary failure
diagnosis at the customer’s expense.
The primary failure diagnosis will, however, be free of charge should the cause of failure be attributable to Mitsubishi Electric
Corporation.
(b) The range shall be limited to normal use within the usage state, usage methods, and usage environment, etc., which follow the
conditions and precautions, etc., given in the instruction manual, user's manual and caution labels on the product.
(c) Even within the gratis warranty term, repairs shall be charged in the following cases.
Gratis Warranty Term and Gratis Warranty Range
■1. ■1.
(1) Mitsubishi shall accept onerous product repairs for seven (7) years after production of the product is discontinued.
Discontinuation of production shall be notified with Mitsubishi Technical Bulletins, etc.
(2) Mitsubishi shall not accept a request for product supply (including spare parts) after production is discontinued.
Onerous repair term after discontinuation of production
■2. ■2.
Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center.
Note that the repair conditions at each FA Center may differ.
Overseas service
■3. ■3.
Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:
Exclusion of loss in opportunity and secondary loss from warranty liability ■4. ■4.
The specifications given in the catalogs, manuals, or technical documents are subject to change without prior notice.
Changes in product specifications
■5. ■5.
(1) In using the Mitsubishi graphic operation terminal, the usage conditions shall be that the application will not lead to a major accident
even if any problem or fault should occur in the graphic operation terminal device, and that backup and fail-safe functions are
systematically provided outside of the device for any problem or fault.
(2) The Mitsubishi graphic operation terminal has been designed and manufactured for applications in general industries, etc.
Thus, applications in which the public could be affected such as in nuclear power plants and other power plants operated by
respective power companies, and applications in which a special quality assurance system is required, such as for Railway
companies or Public service shall be excluded from the graphic operation terminal applications.
In addition, applications in which human life or property could be greatly affected, such as in aircraft, medical, railway applications,
incineration and fuel devices, manned transportation equipment, recreation and amusement devices, safety devices, shall also be
excluded from the graphic operation terminal.
Even for the above applications, however, Mitsubishi Electric Corporation may consider the possibility of an application, provided
that the customer notifies Mitsubishi Electric Corporation of the intention, the application is clearly defined and any special quality is
not required, after the user consults the local Mitsubishi representative.
Product application
■6. ■6.
(1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
(2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
(3) Special damages and secondary damages whether foreseeable or not, compensation for accidents, and compensation for
damages to products other than Mitsubishi products.
(4) Replacement by the user, maintenance of on-site equipment, start-up test run and other tasks.