Mitsubishi Electric GT16, User Manual

Page: 964 / 1306

48 - 6
48. CONNECTION TO FUJI TEMPERATURE CONTROLLER
48.4 GOT Side Settings
48.4 GOT Side Settings
48.4.1 Setting communication interface
(Communication settings)
Set the channel of the connected equipment.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: FUJI
• Controller Type: PXR/PXG/PXH
• I/F: Interface to be used
• Driver: FUJI PXR/PXG/PXH
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
48.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
17.1.2 I/F communication setting
48.4.2 Communication detail settings
Make the settings according to the usage environment.
POINT POINT POINT
(1) Host Address
Do not specify a number between 200 and 215.
(2) Format
• When connecting to PXH, specify the format 1.
• When connecting to only PXR/PXG, specifying
the format 2 is recommended.
(3) Delay Time
Set the delay time to 5ms or more.
(4) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following.
12. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(5) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
2.
3.
4.
Click!
Item Description Range
Transmission
Speed
Set this item when change the transmission
speed used for communication with the
connected equipment.
(Default: 9600bps)
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
Data Bit
Set this item when change the data length
used for communication with the connected
equipment.
(Default: 8bits)
7bits/8bits
Stop Bit
Specify the stop bit length for
communications.(Default: 1bit)
1bit/2bits
Parity
Specify whether or not to perform a parity
check, and how it is performed during
communication.
(Default: Odd)
None
Even
Odd
Retry
Set the number of retries to be performed
when a communication error occurs.
(Default: 0time)
0 to 5times
Timeout Time
Set the time period for a communication to
time out.(Default: 3sec)
3 to 30sec
Host Address
Specify the host address (station No. of the
GOT to which the temperature controller is
connected) in the connected network.
(Default: 1)
1 to 255
Delay Time
Set this item to adjust the transmission timing
of the communication request from the
GOT.(Default: 5ms)
0 to 300ms
Format
Select the communication format.
(Default: 1)
Format 1:
Accessible to PXR/PXG/PXH
Format 2:
Accessible to PXR/PXG,
Not accessible to PXH
1/2