Mitel 3300, Technician'S Handbook

Page: 42 / 431

32
3300 ICP Technician’s Handbook
8. In the License and Option Selection screen, enter the ARID
(Application Record ID) and click Retrieve Licenses .
- If the licenses exist, the screen is updated with all of the licenses
and options.
- If the licenses do not exist, the Software Installer will try to connect
to the AMC to get licenses.
- If the licenses do not exist and the AMC cannot be reached, the
Software Installer creates a batch file that contains the options. You
can reconnect to the Software Installer later to run the batch file to
license the options.
9. To program the local system as the Designated License Manager,
enter the
GARID (Group Application Record ID) and click Retreive
Licenses . If the AMC can be reached and the licenses exist, the
screen is updated. If not, the Software Installer creates a batch file to
facilitate offline registration.
10. Allocate licenses to the Purchased Options.
11. Click Next and enter the Configuration Options.
12. Click Next .
13. Click Start .
14. If you selected Perform Full Install in Step 3, click Next to display the
Define Upgrade Options screen, then
- Deselect Database Backup .
- Under Help Files, select Do Not Install .
- Leave Configure License and Options Configuration selected.
- Browse to the database backup file you want to restore and select it.
- Click Next .
Tip: You will not be able to continue with the installation until the licenses
have been obtained.
Tip: When using the License and Restore option, you must restore from a
database backup file.
Tip: Enable the IP Networking option and MiTAI/TAPI Computer
Integration option.
Note: If license sharing is enabled, the total number of licenses available for
allocation is determined when the system joins an application group that has
a Designated License Manager.