Mitel 3300, Technician'S Handbook

Page: 32 / 431

22
3300 ICP Technician’s Handbook
- Click OK .
- In the Network and Dial-up Connections window, right-click on the
connection for the laptop NIC and click
Enable .
You can now connect to the Mitel Communications Director through
gigabit ethernet Port 1 of the MXe Server.
24. Launch Microsoft Internet Explorer and go to the following URL:
https:/<your APC IP>/server-manager .
25. At the login page, enter
Username: admin
Password: (enter the Linux admin password that you set through the
server console). The Server Manager application opens.
26. If the PC that you use to run the MCD Software Installer is not installed
on the same network as the MXe Server, you must add the network.
Under
Security , click Local Networks and add the IP address of the
network. Also add the networks of any other Mitel applications or tools,
such as OPS Manager, Enterprise Manager, system administrator
client stations and so forth that require access to the MXe Server. To
extend privileges to a network:
- Under Security , click Local networks .
- Click Add network .
- Enter the Network Address.
- Enter the Subnet Mask.
- Enter the Router.
- Click Add .
27. If the system is connected to the internet, the date and time is set
automatically from a Network Time Server. Optionally, you can set the
date and time manually:
- Under Configuration , click Date and Time .
- Click Disable Network Time Server .
- Click Save .
- Set the date, time, and time zone.
- Click Save .
28. From the Software Installer, connect to the MXe Server.
29. Re-license the 3300 ICP software on the MXe Server. See “Licensing
the MXe Server with AMC” on page 23 for instructions.