Mitel 3300, Technician'S Handbook

Page: 164 / 431

154
3300 ICP Technician’s Handbook
32. Change the address of the laptop’s Network Interface Card (NIC) back
to the IP address for your network. The following procedure is for
Windows 2000 or Windows XP:
- From the Windows Start menu, click Settings , click Network and
Dial-up Connections , and then click the Local Area Network of the
laptop NIC card
- Click Properties .
- Select Internet Protocol (TCP/IP)
- Click Properties .
- Click “Use the following IP Address” option.
- Change the address of the NIC to the Network IP Address
- Click OK .
- In the Network and Dial-up Connections window, right-click on the
connection for the laptop NIC and click
Enable .
You can now connect to the Mitel Communications Director through
gigabit ethernet Port 1 of the MXe Server.
33. Launch Microsoft Internet Explorer and go to the following URL:
https:/<your APC IP>/server-manager .
34. At the login page, enter
Username: admin
Password: (enter the Linux admin password that you set through the
server console). The Server Manager application opens.
35. If the PC that you use to run the MCD Software Installer Tool is not
installed on the same network as the MXe Server, you must add the
network. Under
Security , click Local Networks and add the IP
address of the network. Also add the networks of any other Mitel
applications or tools, such as OPS Manager, Enterprise Manager,
system administrator client stations and so forth that require access to
the MXe Server. To extend privileges to a network:
- Under Security , click Local networks .
- Click Add network .
- Enter the Network Address.
- Enter the Subnet Mask.
- Enter the Router.
- Click Add .