402
3300 ICP Technician’s Handbook
6.
Click
Have Disk
.
7.
Type
c:\Program Files\Mitel\Imat
in the
Copy manufacturer's files
from
field, then click
OK
.
8.
In the
Install from Disk
window, click
OK
.
9.
Click
Next
to select the NT Direct Connection.
10.
Select
COM 1
or
COM 2
, and then click
Next
.
11.
Click
Finish
.
12.
In the
Modem Properties
window, select
NT Direct Connection
,
then click
Properties
.
13.
Set the following parameters:
-
Maximum speed:
38 400
-
Check:
Only connect at this speed
-
Data bits:
8
-
Parity:
None
-
Stop bits:
1
-
Mode:
Auto Answer
In
Advanced Settings
window, do the following for a direct connect
cable:
-
Turn off:
Error control
-
Turn off:
Flow Control
14.
Click
OK
and close the Control Panel window.
Physically Connecting the PC to an NSU
• Connect an RS-232 straight DTE serial cable between the NSU’s serial
port and the PC’s serial port.
Creating a Dial-Up Network Connection on Windows
95/98
Typically, you need to follow this procedure twice to create two Dial-up
Networking connections, one for on-site direct access, and one for remote
modem access.
Tip:
If you are connecting through a modem, use a null modem adapter on
the NSU side.
Summary of Contents for 3300
