Mitel 3300, Technician'S Handbook

Page: 89 / 431

79
Installation and Programming
Both types of lines will work satisfactorily with the 3300 ICP, however line
type ‘3’ is the preferred line type for connecting a PBX/PABX.
Configure Analog Music On Hold/Paging
The 3300 ICP supports
• Analog Music on Hold
• Digital Music on Hold (via a DMP)
• Embedded Music on Hold
Refer to the System Administration Tool online help for instructions on how
to program Digital Music on Hold or Embedded Music on Hold.
To program Analog Music on Hold:
1. Launch the System Administration Tool
2. In the System Options form
- Set the Music On Hold option to "Yes".
- (Optional) Class of Service Options form.
3. In the E&M Trunk Circuit Descriptors form
- Set the Outgoing Start Type parameter to "Immediate".
- Set the Transmission Facility parameter to "2 wire".
- Set the 2 Wire Balanced Network Setting parameter to "600".
- Set “Perform Seize Test on Out-of-Service Trunks” to "No".
- All other parameters may be any value.
4. In the E&M Trunk Assignments form
- Ensure that the trunk number is unique. The service number, E&M
trunk circuit descriptor number, and the interconnect number may
be the same as other E&M trunks.
5. In the System Access Points form
- Set "Music Source" to "External".
- In the "Music Source Port - Location ID" field, enter the PLID of the
E&M trunk circuit.
Note: Music on Hold can be assigned to either of the first two ports on a
Universal ASU E&M card or to the E&M port on the Analog Main Board
(AMB) (on a controller with embedded analog). Only one Music on Hold
source is permitted per system.