Mindray DC-6, Service Manual

Page: 14 / 191

VIII
(5) Dot not place any object on the monitor, because it may fall
and injure people.
(6) Fasten the peripheral devices before moving the equipment.
Otherwise, the peripheral devices may fall and injure people.
(7) When moving the equipment on steps, you shall prevent it
from being toppled.
4
． ． ． ．
Do not vibrate the equipment excessively
(
when moving the
equipment); otherwise the mechanical parts (such as casters) may
be damaged. If the equipment is often moved on a bumpy floor,
contact the Mindray sales office, customer service department or
representative.
5. Do not connect this system to outlets with the same circuit breakers
and fuses that control the current of devices such as life-support
systems. If this system malfunctions and generates an
overcurrent, or when there is an instantaneous current at power ON,
the circuit breakers and fuses of the building’s supply circuit may
be tripped.
6
．
． ．
．
Always keep the machine dry. Avoid transporting this machine
quickly from the cold place to the warm place; otherwise
condensation or water drops may be formed, causing short circuit.
7
． ． ． ．
If the circuit breaker is tripped, it indicates that the machine or the
peripheral devices have problems. In these cases, you cannot repair
by yourself but should contact the Mindray sales office, customer
service department or representative.
8
．
． ．
．
There is no risk of high-temperature burns during routine
ultrasound examinations, even if, due to environment temperature
and exam modes, the surface temperature of the transducer exceeds
the body temperature of the patient. To prevent high-temperature
burns, do not apply the transducer to the same region on the patient
for a long time. Apply the transducer only for as long as required
time for diagnosis.
9
． ． ． ．
This device and its accessories are not disinfected and sterilized
when they are out of the factory, so the user shall disinfect and
sterilize transducers or biopsy brackets as per the manuals prior to
use of transducers or biopsy brackets. After the sterilization or
disinfection of accessories, chemicals must be washed out or gases
must be discharged thoroughly from the accessories. Remaining
residual chemicals or gases will not only result in damage to the
accessories but also can be harmful to human bodies.