Mindray DC-6, Service Manual

Page: 74 / 191

System Structure and Assembly/Disassembly
4-9
Replacement of LCD monitor bottom light is described as follows
：
a) Swivel the monitor to one side of the machine (as shown in the figure below);
b) Remove two M3X8 countersunk screws to remove “transparent cover”.
c) Remove the old lamp and replace it with new one.
4.3.3 Replacement of spring damping parts
1
）
Lock up the four casters;
2
）
Perform step 4.3.1.2 to remove the monitor;
3
）
Remove the upper support arm cover;
Light
Transparent cover
M3X8 countersunk screw