Mindray DC-6, Service Manual

Page: 155 / 191

System Maintenance
7-12
6. Click the Load Product Symbol button, and the following dialog box appears.
7. Select the corresponding file in the C:\Picture\logo, and click OK.
8. On the Config screen, respectively click the Load Boot Logo and Load Dormancy
Image to set the corresponding images.
Note: Refer to Appendix C for Initial Data of the Hard Disk.
9. Press F10 on the keyboard to enter the preset menu, move the cursor onto “Preset
Data” and its submenu pops up, select “Default” and press the Set key to recover
the factory setups.
7.2.5 Hard disk recovery
If the hard disk is damaged or the system data is damaged, please perform the following
operations to recover.
Note: You must confirm that the data of the hard disk recovery package are compatible
with the current software system; otherwise it may damage the system.
1. If the hard disk is damaged, replace it with a new one. Please format the new hard
disk according to the FAT32 format. Partitions are shown as follows:
Hard Disk C disk D disk E disk
40G 10G 20G 9G
80G 19G 27G 27G
2. Copy the data of the hard disk recovery and files of the configuration files package to
the U diskl
3. Turn off the machine, insert the U disk to the USB port, and connect the recovery
dog
（
2105-20-40622
）
to the parallel port.