Mindray DC-6, Service Manual

Page: 16 / 191

X
NOTE: 1. Do not use the machine in the vicinity of strong electromagnetic field (such
as the transformer), which may affect the performance of the machine.
2. Do not use the machine in the vicinity of high-frequency radiation source,
which may affect the performance of the machine or even lead to failure.
3. To avoid damaging the machine, do not use the machine in following
environment:
(1) Locations exposed to direct sunlight;
(2) Locations subject to sudden changes in temperature;
(3) Dusty locations;
(4) Locations subject to vibration;
(5) Locations near heat generators;
(6) Locations with high humidity.
4. Turn ON the system only after the power has been OFF for more than 20
seconds. If the system is turned ON immediately after being turned OFF,
the system may malfunction.
5. Turn OFF the auxiliary power switch or stop transmission through the
『
Freeze
』
key before connecting or disconnecting a transducer. If a
transducer is connected or disconnected with an image displayed, the
system and/or the transducer may malfunction.