Megger ADX15, User Manual

Page: 21 / 179

Rear Panel Connections
The graphic below identifies the components and connections found on the rear of the ADX.
Fig 6: Rear panel connections.
No Description
1 Breaker reset button.
2 A/C input power receptacle.
3 Receptacles for red test leads (3x). Test leads are labeled to facilitate match and proper attachment
between receptacles and device under test.
4 Ground lead receptacle (1x).
5 Armature test receptacle (in this space for ADX15A only).
6 Safety ground/power pack ground stud.
7 Remote E-Stop/safety lights connector. See details on the next page.
8 RS-485 connection.*
9 Power pack interface connector (optional).
10 Footswitch connector.
11 HDMI output connector—display ADX screen output to an external monitor.
Ensure that the external monitor being used is plugged into the HDMI connector on the back panel
before starting the ADX application.
12 Ethernet connector.
13 PD calibration connector.*
14 RLC adapter—optional accessory except on ADX15 ARM.
* These elements currently have no functionality and are reserved for future feature implementation.
On some units, plugs may be installed in place of optional elements.
www.megger.com
Megger Baker ADX User Guide
11
Rear Panel Connections