Megger ADX15, User Manual

Page: 53 / 179

www.megger.com
Megger Baker ADX User Guide
43
Test Configuration
Top Section
The top section of the screen provides fields for locating and selecting a test configuration, specifying the device that
will perform testing on the asset, the type of power pack used (if Output Device is Power Pack), and where the tester
will connect to the asset.
Fig 43: Test Configuration screen; general information section.
When you touch the Connection drop-down list, select whether the ADX will be connected directly to the asset (At
Motor) or to a remote testing junction (At Switchgear). Values entered into the test fields will differ depending on the
connection chosen due to factors such as cable run lengths and other components connected to the circuit.
If desired, define general attributes for the Test Configuration by selecting an attribute using the arrow to the left of the
Attribute Name field or entering a name and value directly in the fields. For example, you could add an attribute called
Standards Compliance to identify that the test configuration is used as part of a compliance process for a particular
standard.
Press the ADD ATTRIBUTE button to complete the assignment when you have made your entries.
The Test Configuration screen contains three other sections for specifying RLC, DC, and Surge test parameters. Tests
are enabled when their associated toggle buttons are moved to right.
Copying Test Configurations
1. If you need to create a new test configuration that is similar to an existing one, select the source configuration then
touch the COPY icon in the top right section.
2. The software will create a new configuration with the name “New Test Configuration” shown in the Test
Configuration field.
3. Edit the name directly in the field, providing a new name that complies with your organization’s established
conventions. (See “Naming Conventions” on the preceding page.)
4. Make changes to configuration values where needed then touch the SAVE icon at top right.