Megger ADX15, User Manual

Page: 139 / 179

Execute Route
As its name indicates, routes are executed from this screen.
1. Select the route you want to execute using the Route drop-down list. The table changes to display the Installations
and assets assigned to the route.
As the table is populated, the software checks the assigned assets for existing results. If the software does not locate a
prior test, the Tested and P/F (Pass/fail) fields will be blank. If a result is found, the date of the last result recorded will
be listed along with the pass/fail status.
2. Before you test the asset, you can view the last result if needed. To do so, tap on the asset result you want to view
to highlight it.
3. Press the VIEW RESULTS button to the right of the list to open the Reports screen for that result.
4. When you have finished reviewing the result, touch the EXIT icon in the top right of the Reports screen to return to
the Execute Route screen.
Fig 128:
Execute Route screen example.
5. If you have a longer list of assets and you want to find something specific in the list, start typing in the Find field.
The Find field has type-ahead capability—as you type, the software filters the list to display items that contain the
characters entered. It will search all the fields and display items matching what you enter.
6. If you want to sort the items in the table, touch the header labels to toggle between ascending and descending
order for that column.
7. If you are ready to test an asset, tap on the asset within the list that you want to test to highlight/select it then press
the TEST ASSET button.
NOTE: When selecting an Installation to test, the Installation must have an asset assigned to it, and the
asset must have a sequence assigned to it.
www.megger.com
Megger Baker ADX User Guide
129
Sequenced Tests Mode