Megger ADX15, User Manual

Page: 140 / 179

8. Follow instructions presented for testing. When the test completes, the software automatically returns you to the
Execute Route screen to continue with your route.
When an asset has been tested, the new result will be saved automatically and will replace the most recent result. A
check mark will appear at the beginning of the row indicating that the asset was tested. The results will lock until all
assets in the route have been tested.
9. When you have completed testing all of your assets within the route, press the CLOSE ROUTE button to save results
and leave the screen.
10. If you have not completed testing all assets within the route, but you plan to continue testing (for example,
shift change or end of work day), press the EXIT icon to leave the Execute Route screen. The route’s progress is
automatically saved and the software will return to the route’s last-known state when testing resumes.
NOTE: The software allows you to close a Route without testing all assigned assets; however, when
you re-open the route to complete testing, you will be required to retest all assets because the software
resets the progress of the route, removing all check mark progress indicators.
11. When you try to close a route that has untested assets, a message appears warning you that not all assets have
been tested. Press No to cancel and return to the Execute Route screen then press the EXIT icon to leave the screen
and keep your route open with the progress saved in its current state.
Fig 129: Warning message presented when trying to close a route with untested assets.
www.megger.com Megger Baker ADX User Guide
130
Sequenced Tests Mode