McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 98 / 276

4
4-20
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring iFCP Connections
Figure 4-8
Edit Remote Connection Dialog Box
NOTE:
To select a range of connections, select the first, then hold down
the
Shift
key while selecting the last connection. To select a set of
connections, hold down the
Ctrl
key while clicking on each connection.
3. To remove iFCP connections, select one or more rows in the table
and click
Remove
. Removing a remote connection terminates all
data sessions to that SAN Router. All devices in the remote
mSAN are removed from the remote mSNS and are no longer
available to the local mSAN.
4. Enable or disable remote connections, if needed (Refer to
Configure Remote iFCP Connections
on page 4-15).
• Select the connections to be enabled or disabled and click the
Enable
or
Disable
button below the list of remote connections.