McDATA Eclipse 2640 SAN, Administration And Configuration Manual

Page: 93 / 276

4
Configuring iSAN Connections
4-15
Configuring iFCP Connections
• Set the local mSAN ID when the SAN Router is installed. The
default value is zero (0). The local mSAN ID is a number
between 0 and 4,294,967,295 that uniquely identifies the local
mSAN.
NOTE:
The SAN Router at each end of the iFCP link (and thus the mSANs at
each end) must have different mSAN IDs.
Configure Remote iFCP Connections
For each SAN Router, you must specify a list of the remote SAN
Routers to which it should export zones.
To configure the remote connections, follow these instructions:
1. Select
Configuration
>
iFCP
>
Remote Connections
to display the
Remote Connections
dialog box ( Figure 4-6 ).
Figure 4-6
Remote Connections Dialog Box